Epiroc Rammer Atlas Copco Hydraulic Breaker Parts

Tag: Slide ring packing 0328043

  • RESTORE PRECISION! KRUPP HM 600 WEAR BUSHING IN STOCK!

    RESTORE PRECISION! KRUPP HM 600 WEAR BUSHING IN STOCK!

    ⚙️ RESTORE PRECISION! KRUPP HM 600 WEAR BUSHING IN STOCK! ⚙️

    Don’t let worn bushings destroy your tool and piston! Replace your damaged lower tool guide with the high-quality HM 600 Wear Bushing (P/N: 0328272).

    This critical component ensures proper alignment, extends the life of your chisel, and maintains maximum impact energy.

    KEY SPECS:

    • Length: 4.72 in.
    • Outer Diameter: 5.12 in.
    • Lower Hammer Part Diameter: 5.12 in.
    • Tool Diameter: 3.94 in.
    • Weight: 10.91 lbs.

    Stop metal-on-metal wear! Order your HM 600 Bushing today.

    Part NamePart Number
    Back-up ring0328046
    Check valve0332406
    Check valve (with part 96)0332494
    Clamping sleeve0100483
    Clamping sleeve0100536
    Clamping sleeve0206736
    Control housing0328009
    Control housing cover0314368
    Control pin I0328011
    Control pin II0328010
    Control piston0328010
    Control valve0328035
    Cylinder0480591
    Cylinder cover0328028
    Cylindrical screw0103785
    Cylinder cover0328028
    Dust cap0995337
    Flat chisel (Type a, 660mm)0480211
    Flat chisel (Type a, 900mm)0480321
    Flat chisel (Type b, 660mm)0480213
    Flat chisel (Type b, 900mm)0480151
    Gasket0479139
    Gasket0479140
    Hexagon bolt0103149
    Hexagon bolt0103296
    Hexagon bolt0105145
    Lock pin0921413
    Lower hammer part0328268
    Lower hammer part (with parts 47-50)0328269
    M oil point (660mm)0476591
    M oil point (900mm)0480215
    M oil point with pyramidal point (660mm)0480497
    Nut0916385
    O-ring0314364
    O-ring0314373
    O-ring0314376
    O-ring0314377
    O-ring0314381
    O-ring0314382
    O-ring0328047
    Percussion piston0328221
    Pin0328275
    Pin0921127
    Pressure accumulator0328044
    Pressure accumulator0328045
    Pressure plate0328006
    Pressure spring0480233
    Regulator0328212
    Regulator item 110328008
    Regulator spring0328020
    Seal bushing0328024
    Sealing ring0328048
    Set of seals0479133
    Slide ring packing0328043
    Slide valve0328005
    Spade (Type a, 660mm)0479216
    Spade (Type b, 660mm)0479217
    Special spring0068212
    Spring ring0432695
    Screw cap1353487
    Stripper ring0328040
    Stud bolt0921415
    Stud bolt (complete)0920744
    Tapered grease nipple0118136
    Threaded bushing0328190
    Threaded insert0186601
    Threaded insert0478306
    Threaded ring0330509
    Washer0480187
    Washer0480191
    Washer0921373
    Wear bushing0328271
    Wear bushing0328272

    HM 1000 Marathon® Hydraulic Hammer & Housing

    Part NamePart NumberNotes
    Complete Hammer & Housing
    HM 1000 Marathon® Hydraulic Hammer3066178
    Complete Hammer Housing (Vibrosilenced)3066169
    Complete Hammer Housing (Vibrosilenced Plus)3067353
    Complete Marathon® Hammer Housing3070010
    Hammer Housing Components
    Damping Element (*)3033467Wear Part
    Shock Absorber (*)3033465Wear Part (Qty: 2)
    Plate (*)3035795Wear Part (Qty: 2)
    Guide Plate (*)3035793Wear Part (Qty: 2)
    Free Ring (*)3035773Wear Part
    Counter Ring (*)3035775Wear Part
    Guide Ring (*)3035777Wear Part
    Retaining Pin (*)3033027Wear Part (Qty: 2)
    Retaining Bush (*)3033043Wear Part (Qty: 2)
    Dust Cover3066028
    Transport Safety Device2262093
    Cylindrical Head Bolt0026883(Qty: 2 for housing, 12 for adapter)
    Lock Washer1850747(Qty: 2 for housing, 12 for adapter)
    Hexagonal Nut0103254(Qty: 2)
    CE Nameplate3070182
    Plastic Parts Set (Pcs 101-105)3066074
    Vibrosilenced Plus Additional Parts
    Hood (Inspection Opening) (*)3033551Wear Part
    Plug (*)2267894Wear Part (Qty: 2)
    Plug (*)2267898Wear Part (Qty: 13)
    Lubrication System
    Confl Lube® II Unit3067123
    Confl Lube® II Connection Kit–See Page 12
    Tool Accessories
    Tool Wiper (*)3066069Wear Part

    HM 1000 Hydraulic Hammer – Main Components

    Part NamePart Number
    Assemblies & Major Parts
    HM 1000 Hydraulic Hammer3033001
    Complete Cylinder Cover (with parts 31, 40)3033003
    Complete Seal Set (with parts 41-44)3066027
    Cylinder3067047
    Percussion Piston3033025
    Lower Hammer Part, pre-assembled (Standard)3070037
    Lower Hammer Part, pre-assembled (with DualProtector)3070038
    Seals, Rings & Small Parts
    Complete Tie Rod (with parts 8, 9)3042944
    O-ring0478171
    Washer3067187
    Centering Bush3033049
    Dowel Pin3052051
    Pressure Accumulator1850519
    O-ring1031912
    Back-up Ring1830529
    Lock Washer1333730
    Cylindrical Head Screw0026648
    O-ring1031990
    Complete Filling Valve (with part 50)0996719
    O-ring0175125
    Complete Tank Connection Flange (with parts 62-64)2263851
    O-ring2328126
    Grooved Ring2263800
    U-seal2267557
    Scraper2267588
    Connection Screw1854657
    Lubrication Nipple0433774
    Threaded Plug1031794
    Seal Ring2267584
    Seal Ring2267589
    O-ring0428169
    Back-up Ring3081845
    Complete Cylinder Cover (with parts 52-56)3097045
    Control Slide Valve3033029
    Cover1331555
    Cylindrical Head Screw0103575
    O-ring0314375
    Screw Plug3035425
    Complete Pump Connection Flange (with parts 62-64)3067925
    Threaded Plug0107881
    O-ring0314370
    Complete Valve3035453
    Seal Set3067117
    Square Section Ring3081872
    O-ring0479721
    Seal Ring3031973
    Back-up Ring2263821
    Retaining Bush0921927
    Retaining Pin3033027
    Retaining Bush3028043
    Plug2262925
    Threaded Plug0478426
    Threaded Insert1031829
    Threaded Insert1031946
    Threaded Insert1031989
    Sieve Disk1844115
    Screw Plug1844113
    Eye Bolt0206598
    Impact Ring3068072
    Threaded Insert3031774
    Wear Bush, DualProtector3069195
    Wear Bush3069193
    Cylindrical Head Screw0106074
    Lock Washer2241563
    O-ring2314272
    Threaded Plug1353488
    Wear Bush3069191
    Dust Cover3066028
    Complete Diaphragm (with back-up ring)2261647
    Seal Set3034311

    Working Tools (Chisels)

    Part NamePart NumberUseful Length (mm)Weight (kg)
    Moil Point (Universal Tool)3067143645 (Std) / 620 (Marathon)128
    Flat Chisel, Transverse3067145645 (Std) / 620 (Marathon)136
    Blunt Tool (Plug Drill)3067119645 (Std) / 620 (Marathon)140

    Note: Parts marked with (*) are subject to wear during normal operation. Replacing these parts due to wear is not covered by the warranty. When ordering, always provide the hammer’s serial number.

    Part No.Pt. Id. – No.Quan-ityDescription
    2261773xHydraulic hammer HM 85 cpl., with hammer bracket
    18517731Hammer bracket, cpl.
    2261774xHydraulic hammer HM 85 cpl., with hammer holder
    18518591Hammer holder, cpl. (basic model)

    Then, another table:

    Part No.Pt. Id. – No.Quan-ityDescription
    22625551Hydraulic hammer HM 85

    Then, a table with individual parts:

    Part No.Pt. Id. – No.Quan-ityDescription
    11332669Cylinder cover
    21847209Cylinder cpl.

    Then, another:

    Part No.Pt. Id. – No.Quan-ityDescription
    11332103Lower hammer part, cpl.
    21344109Percussion piston

    Then, a longer list:

    Part No.Pt. Id. – No.Quan-ityDescription
    61332003Tensioning bolt
    80480581Washer
    90203349Hexagonal nut
    10*1031483O-ring
    110996637Washer
    120996633Control slide valve
    150996639Pressure spring
    160996719Filling valve, cpl. with part no. 44
    17*0175125O-ring
    181031476Screw connection (male thread)
    19*0478171O-ring
    201353486Screw cap
    21*0314456O-ring
    23*2267589Seal ring
    24*1329090Quadring seal
    25*1329087O-ring
    26*1329089Slide ring seal
    27*1329086O-ring
    28*2262987Slide ring seal

    8100446 pin main boom
    8100949 pin stick main

    0420110 RING WIPER 110x125x7
    3060476 BUSHING
    3079233 BUSHING
    4074008 SEAL DUST
    4251212 SEAL DUST
    4609091 – BUSHING
    4660855 – BUSHING
    3038820 PIN CYLINDER Ø 110MM
    4487682 O-RING
    3026075 BUSHING
    3079232 BUCKET PIN Ø 110MM
    3055219 PIN
    3093215 PIN Ø 110MM
    3084263 PIN
  • Krupp Hydraulic Hammer HM 600 Lower hammer part 0328269

    Krupp Hydraulic Hammer HM 600 Lower hammer part 0328269

    ⚠️ KRUPP HM 600 DOWN? GET BACK TO WORK! ⚠️

    Restore your hydraulic hammer’s power with a new Lower Hammer Part (P/N: 0328269) from MERIT.

    This is the essential, heavy-duty component you need for maximum reliability on the job site.

    SPECS:

    • Weight: 225.66 lbs
    • Dimensions (Width x Height x Depth): 9.25 in. x 16.54 in. x 8.66 in.

    Stop searching, start breaking! Contact MERIT today for pricing and fast shipping.

    Part NamePart Number
    Back-up ring0328046
    Check valve0332406
    Check valve (with part 96)0332494
    Clamping sleeve0100483
    Clamping sleeve0100536
    Clamping sleeve0206736
    Control housing0328009
    Control housing cover0314368
    Control pin I0328011
    Control pin II0328010
    Control piston0328010
    Control valve0328035
    Cylinder0480591
    Cylinder cover0328028
    Cylindrical screw0103785
    Cylinder cover0328028
    Dust cap0995337
    Flat chisel (Type a, 660mm)0480211
    Flat chisel (Type a, 900mm)0480321
    Flat chisel (Type b, 660mm)0480213
    Flat chisel (Type b, 900mm)0480151
    Gasket0479139
    Gasket0479140
    Hexagon bolt0103149
    Hexagon bolt0103296
    Hexagon bolt0105145
    Lock pin0921413
    Lower hammer part0328268
    Lower hammer part (with parts 47-50)0328269
    M oil point (660mm)0476591
    M oil point (900mm)0480215
    M oil point with pyramidal point (660mm)0480497
    Nut0916385
    O-ring0314364
    O-ring0314373
    O-ring0314376
    O-ring0314377
    O-ring0314381
    O-ring0314382
    O-ring0328047
    Percussion piston0328221
    Pin0328275
    Pin0921127
    Pressure accumulator0328044
    Pressure accumulator0328045
    Pressure plate0328006
    Pressure spring0480233
    Regulator0328212
    Regulator item 110328008
    Regulator spring0328020
    Seal bushing0328024
    Sealing ring0328048
    Set of seals0479133
    Slide ring packing0328043
    Slide valve0328005
    Spade (Type a, 660mm)0479216
    Spade (Type b, 660mm)0479217
    Special spring0068212
    Spring ring0432695
    Screw cap1353487
    Stripper ring0328040
    Stud bolt0921415
    Stud bolt (complete)0920744
    Tapered grease nipple0118136
    Threaded bushing0328190
    Threaded insert0186601
    Threaded insert0478306
    Threaded ring0330509
    Washer0480187
    Washer0480191
    Washer0921373
    Wear bushing0328271
    Wear bushing0328272