⚙️ RESTORE PRECISION! KRUPP HM 600 WEAR BUSHING IN STOCK! ⚙️
Don’t let worn bushings destroy your tool and piston! Replace your damaged lower tool guide with the high-quality HM 600 Wear Bushing (P/N: 0328272).
This critical component ensures proper alignment, extends the life of your chisel, and maintains maximum impact energy.
KEY SPECS:
- Length: 4.72 in.
- Outer Diameter: 5.12 in.
- Lower Hammer Part Diameter: 5.12 in.
- Tool Diameter: 3.94 in.
- Weight: 10.91 lbs.
Stop metal-on-metal wear! Order your HM 600 Bushing today.
| Part Name | Part Number |
|---|---|
| Back-up ring | 0328046 |
| Check valve | 0332406 |
| Check valve (with part 96) | 0332494 |
| Clamping sleeve | 0100483 |
| Clamping sleeve | 0100536 |
| Clamping sleeve | 0206736 |
| Control housing | 0328009 |
| Control housing cover | 0314368 |
| Control pin I | 0328011 |
| Control pin II | 0328010 |
| Control piston | 0328010 |
| Control valve | 0328035 |
| Cylinder | 0480591 |
| Cylinder cover | 0328028 |
| Cylindrical screw | 0103785 |
| Cylinder cover | 0328028 |
| Dust cap | 0995337 |
| Flat chisel (Type a, 660mm) | 0480211 |
| Flat chisel (Type a, 900mm) | 0480321 |
| Flat chisel (Type b, 660mm) | 0480213 |
| Flat chisel (Type b, 900mm) | 0480151 |
| Gasket | 0479139 |
| Gasket | 0479140 |
| Hexagon bolt | 0103149 |
| Hexagon bolt | 0103296 |
| Hexagon bolt | 0105145 |
| Lock pin | 0921413 |
| Lower hammer part | 0328268 |
| Lower hammer part (with parts 47-50) | 0328269 |
| M oil point (660mm) | 0476591 |
| M oil point (900mm) | 0480215 |
| M oil point with pyramidal point (660mm) | 0480497 |
| Nut | 0916385 |
| O-ring | 0314364 |
| O-ring | 0314373 |
| O-ring | 0314376 |
| O-ring | 0314377 |
| O-ring | 0314381 |
| O-ring | 0314382 |
| O-ring | 0328047 |
| Percussion piston | 0328221 |
| Pin | 0328275 |
| Pin | 0921127 |
| Pressure accumulator | 0328044 |
| Pressure accumulator | 0328045 |
| Pressure plate | 0328006 |
| Pressure spring | 0480233 |
| Regulator | 0328212 |
| Regulator item 11 | 0328008 |
| Regulator spring | 0328020 |
| Seal bushing | 0328024 |
| Sealing ring | 0328048 |
| Set of seals | 0479133 |
| Slide ring packing | 0328043 |
| Slide valve | 0328005 |
| Spade (Type a, 660mm) | 0479216 |
| Spade (Type b, 660mm) | 0479217 |
| Special spring | 0068212 |
| Spring ring | 0432695 |
| Screw cap | 1353487 |
| Stripper ring | 0328040 |
| Stud bolt | 0921415 |
| Stud bolt (complete) | 0920744 |
| Tapered grease nipple | 0118136 |
| Threaded bushing | 0328190 |
| Threaded insert | 0186601 |
| Threaded insert | 0478306 |
| Threaded ring | 0330509 |
| Washer | 0480187 |
| Washer | 0480191 |
| Washer | 0921373 |
| Wear bushing | 0328271 |
| Wear bushing | 0328272 |
HM 1000 Marathon® Hydraulic Hammer & Housing
| Part Name | Part Number | Notes |
|---|---|---|
| Complete Hammer & Housing | ||
| HM 1000 Marathon® Hydraulic Hammer | 3066178 | |
| Complete Hammer Housing (Vibrosilenced) | 3066169 | |
| Complete Hammer Housing (Vibrosilenced Plus) | 3067353 | |
| Complete Marathon® Hammer Housing | 3070010 | |
| Hammer Housing Components | ||
| Damping Element (*) | 3033467 | Wear Part |
| Shock Absorber (*) | 3033465 | Wear Part (Qty: 2) |
| Plate (*) | 3035795 | Wear Part (Qty: 2) |
| Guide Plate (*) | 3035793 | Wear Part (Qty: 2) |
| Free Ring (*) | 3035773 | Wear Part |
| Counter Ring (*) | 3035775 | Wear Part |
| Guide Ring (*) | 3035777 | Wear Part |
| Retaining Pin (*) | 3033027 | Wear Part (Qty: 2) |
| Retaining Bush (*) | 3033043 | Wear Part (Qty: 2) |
| Dust Cover | 3066028 | |
| Transport Safety Device | 2262093 | |
| Cylindrical Head Bolt | 0026883 | (Qty: 2 for housing, 12 for adapter) |
| Lock Washer | 1850747 | (Qty: 2 for housing, 12 for adapter) |
| Hexagonal Nut | 0103254 | (Qty: 2) |
| CE Nameplate | 3070182 | |
| Plastic Parts Set (Pcs 101-105) | 3066074 | |
| Vibrosilenced Plus Additional Parts | ||
| Hood (Inspection Opening) (*) | 3033551 | Wear Part |
| Plug (*) | 2267894 | Wear Part (Qty: 2) |
| Plug (*) | 2267898 | Wear Part (Qty: 13) |
| Lubrication System | ||
| Confl Lube® II Unit | 3067123 | |
| Confl Lube® II Connection Kit | – | See Page 12 |
| Tool Accessories | ||
| Tool Wiper (*) | 3066069 | Wear Part |
HM 1000 Hydraulic Hammer – Main Components
| Part Name | Part Number |
|---|---|
| Assemblies & Major Parts | |
| HM 1000 Hydraulic Hammer | 3033001 |
| Complete Cylinder Cover (with parts 31, 40) | 3033003 |
| Complete Seal Set (with parts 41-44) | 3066027 |
| Cylinder | 3067047 |
| Percussion Piston | 3033025 |
| Lower Hammer Part, pre-assembled (Standard) | 3070037 |
| Lower Hammer Part, pre-assembled (with DualProtector) | 3070038 |
| Seals, Rings & Small Parts | |
| Complete Tie Rod (with parts 8, 9) | 3042944 |
| O-ring | 0478171 |
| Washer | 3067187 |
| Centering Bush | 3033049 |
| Dowel Pin | 3052051 |
| Pressure Accumulator | 1850519 |
| O-ring | 1031912 |
| Back-up Ring | 1830529 |
| Lock Washer | 1333730 |
| Cylindrical Head Screw | 0026648 |
| O-ring | 1031990 |
| Complete Filling Valve (with part 50) | 0996719 |
| O-ring | 0175125 |
| Complete Tank Connection Flange (with parts 62-64) | 2263851 |
| O-ring | 2328126 |
| Grooved Ring | 2263800 |
| U-seal | 2267557 |
| Scraper | 2267588 |
| Connection Screw | 1854657 |
| Lubrication Nipple | 0433774 |
| Threaded Plug | 1031794 |
| Seal Ring | 2267584 |
| Seal Ring | 2267589 |
| O-ring | 0428169 |
| Back-up Ring | 3081845 |
| Complete Cylinder Cover (with parts 52-56) | 3097045 |
| Control Slide Valve | 3033029 |
| Cover | 1331555 |
| Cylindrical Head Screw | 0103575 |
| O-ring | 0314375 |
| Screw Plug | 3035425 |
| Complete Pump Connection Flange (with parts 62-64) | 3067925 |
| Threaded Plug | 0107881 |
| O-ring | 0314370 |
| Complete Valve | 3035453 |
| Seal Set | 3067117 |
| Square Section Ring | 3081872 |
| O-ring | 0479721 |
| Seal Ring | 3031973 |
| Back-up Ring | 2263821 |
| Retaining Bush | 0921927 |
| Retaining Pin | 3033027 |
| Retaining Bush | 3028043 |
| Plug | 2262925 |
| Threaded Plug | 0478426 |
| Threaded Insert | 1031829 |
| Threaded Insert | 1031946 |
| Threaded Insert | 1031989 |
| Sieve Disk | 1844115 |
| Screw Plug | 1844113 |
| Eye Bolt | 0206598 |
| Impact Ring | 3068072 |
| Threaded Insert | 3031774 |
| Wear Bush, DualProtector | 3069195 |
| Wear Bush | 3069193 |
| Cylindrical Head Screw | 0106074 |
| Lock Washer | 2241563 |
| O-ring | 2314272 |
| Threaded Plug | 1353488 |
| Wear Bush | 3069191 |
| Dust Cover | 3066028 |
| Complete Diaphragm (with back-up ring) | 2261647 |
| Seal Set | 3034311 |
Working Tools (Chisels)
| Part Name | Part Number | Useful Length (mm) | Weight (kg) |
|---|---|---|---|
| Moil Point (Universal Tool) | 3067143 | 645 (Std) / 620 (Marathon) | 128 |
| Flat Chisel, Transverse | 3067145 | 645 (Std) / 620 (Marathon) | 136 |
| Blunt Tool (Plug Drill) | 3067119 | 645 (Std) / 620 (Marathon) | 140 |
Note: Parts marked with (*) are subject to wear during normal operation. Replacing these parts due to wear is not covered by the warranty. When ordering, always provide the hammer’s serial number.
| Part No. | Pt. Id. – No. | Quan-ity | Description |
|---|---|---|---|
| 2261773 | x | Hydraulic hammer HM 85 cpl., with hammer bracket | |
| 1851773 | 1 | Hammer bracket, cpl. | |
| 2261774 | x | Hydraulic hammer HM 85 cpl., with hammer holder | |
| 1851859 | 1 | Hammer holder, cpl. (basic model) |
Then, another table:
| Part No. | Pt. Id. – No. | Quan-ity | Description |
|---|---|---|---|
| 2262555 | 1 | Hydraulic hammer HM 85 |
Then, a table with individual parts:
| Part No. | Pt. Id. – No. | Quan-ity | Description |
|---|---|---|---|
| 1 | 1332669 | Cylinder cover | |
| 2 | 1847209 | Cylinder cpl. |
Then, another:
| Part No. | Pt. Id. – No. | Quan-ity | Description |
|---|---|---|---|
| 1 | 1332103 | Lower hammer part, cpl. | |
| 2 | 1344109 | Percussion piston |
Then, a longer list:
| Part No. | Pt. Id. – No. | Quan-ity | Description |
|---|---|---|---|
| 6 | 1332003 | Tensioning bolt | |
| 8 | 0480581 | Washer | |
| 9 | 0203349 | Hexagonal nut | |
| 10* | 1031483 | O-ring | |
| 11 | 0996637 | Washer | |
| 12 | 0996633 | Control slide valve | |
| 15 | 0996639 | Pressure spring | |
| 16 | 0996719 | Filling valve, cpl. with part no. 44 | |
| 17* | 0175125 | O-ring | |
| 18 | 1031476 | Screw connection (male thread) | |
| 19* | 0478171 | O-ring | |
| 20 | 1353486 | Screw cap | |
| 21* | 0314456 | O-ring | |
| 23* | 2267589 | Seal ring | |
| 24* | 1329090 | Quadring seal | |
| 25* | 1329087 | O-ring | |
| 26* | 1329089 | Slide ring seal | |
| 27* | 1329086 | O-ring | |
| 28* | 2262987 | Slide ring seal |
8100446 pin main boom
8100949 pin stick main
| 0420110 RING WIPER 110x125x7 |
| 3060476 BUSHING |
| 3079233 BUSHING |
| 4074008 SEAL DUST |
| 4251212 SEAL DUST |
| 4609091 – BUSHING |
| 4660855 – BUSHING |
| 3038820 PIN CYLINDER Ø 110MM |
| 4487682 O-RING |
| 3026075 BUSHING |
| 3079232 BUCKET PIN Ø 110MM |
| 3055219 PIN |
| 3093215 PIN Ø 110MM |
| 3084263 PIN |
Rock Breaker Store 
Leave a comment